The JULIA jacket pattern was developed for an average height of 1.65m. It has a slightly oversized look and the length reaches the buttocks. You can consult the photos on the site to get a more precise idea.

EXTEND or SHORTEN the length of the JULIA jacket in 3 steps:

  1. Check the length of the finished garment using the table below
  2. Determine the desired length. You can measure yourself or use a jacket from your wardrobe. Don't hesitate to look at the results in the many photos of creations on the JULIA model page.
  3. Calculate the difference between the pattern and the desired length then proceed with the pattern modification explained below
To determine your size, you can use the article: How to choose your size?

Changes to patronage:

After drawing these modification lines:

  • -To reduce, fold parallel to the value to be shortened
  • -To lengthen, cut on the line, spread the pieces parallel to each other, fill the space with a piece of paper and tape.

Lengthen or shorten the JULIA jacket pattern on the upper part

If the amount you want to shorten or lengthen exceeds 2-3cm, you can also modify the bust part of the jacket in order to balance the proportions of the jacket.

Here is the recommended position for the adjustment lines:

Download and/or print the tutorial:

It is easier for you to save the tutorial on your computer to consult it, or to print it, do not hesitate to download it for free.

Tutorial-lengthen-or-shorten-the-pattern-JACKET-JULIA-1Download